ADVERTISEMENT
Sort
2001 - 3000Clear all

Top2019 / 2020 Kobelco SK17SR-5 with WARRANTY 2 AVAILABLE

$28,000
Spreyton, TAS

06/05/2024

Top2020 BANDIT INTIMIDATOR 12XP COMMERCIAL WOOD CHIPPER

  • 2093 hr

11/2019 BANDIT INTIMIDATOR 12XP COMMERCIAL 12" DIESEL WOOD CHIPPER Purchased new in 2020 for $138,600 CLEARANCE PRICE NOW AT ONLY $64,950 plus gst Approxiemetly 1000 hours chipping small branches around power lines Low 2093 total engine hours Fully tested & ready to go straight back into work Manufactured in USA Clean & tidy chipper & hard to find a better unit Current Photo's of actual Chipper & of the unit you will receive BANDIT INTIMIDATOR 12XP WOOD CHIPPER is a 12” Capacity Hand-Fed Profe

$64,950
Austral, NSW

Dealer used
18 hours ago

TopForklift CAT 2.5 Tonne Diesel 2021 Container Mast

  • 2454 hr

Forklift CAT 2.5 Tonne Diesel 2021 Container Mast. Side shift and fork positioning. 2454 hours.

$19,500
Malaga, WA

Dealer used
06/05/2024

TopTCM 2500kg LPG forklift with 4350mm 3 stage mast & sideshift

  • 2492 hr

Unit / Fleet: R2746 Make: TCM Model: FG25T3 Serial Number: 2B504448 Engine Hours: 2492 at 21/6/23 Nominal Lift Capacity: 2500kg Fuel Type: LPG Transmission: Automatic Equipment Type: Forklift Mast Type: 3 Stage Lift Height: 4350mm Tyre Type: Solid Flashing Beacon: Yes Work Lights: Yes Hydraulic Valves: 3 Fork Length: 1070mm Seat Belt: Yes Attachments / Notes: Sideshift ex. GST

$19,900
Malaga, WA

Dealer used
06/05/2024

TopCompressor Denyo 130CFM Diesel 2975 Hours

  • 2975 hr

Compressor Denyo 130CFM Diesel 2975 Hours. 2 outlets.

$8,900
Malaga, WA

Dealer used
07/05/2024

TopEngines

  • 3000 hr

Cat C18 Running Engines have video Computer Print outs Complete Engines located perth Area

$55,000
Perth, WA

Dealer used
07/05/2024

TCM 2500kg LPG forklift with 4800mm 3 stage mast & sideshift

  • 2740 hr

Unit / Fleet: U6190 Make: TCM Model: FG25T3 Serial Number: 2B506374 Engine Hours: 2740 @ 8/22 Nominal Lift Capacity: 2500kg Fuel Type: LPG Transmission: Automatic Equipment Type: Forklift Mast Type: 3 Stage Lift Height: 4800mm Tyre Type: Pneumatic Flashing Beacon: Yes Work Lights: Yes Hydraulic Valves: 3 Fork Length: 1070mm Seat Belt: Yes Attachments / Notes: Sideshift *Excludes GST

$17,500
Malaga, WA

Dealer used
11 hours ago

Komatsu 1800kg LPG forklift with 4300mm 3-stage mast & sideshift

  • 2329 hr

Unit / Fleet: U6615 Make: Komatsu Model: FG18HT-20 Serial Number: 658679 Engine Hours: 2329 at 6/6/23 Year: 2006 Nominal Lift Capacity: 1800kg Fuel Type: LPG Transmission: Automatic Equipment Type: Forklift Mast Type: 3 Stage Lift Height: 4300mm Tyre Type: Solid Flashing Beacon: Yes Work Lights: Yes Hydraulic Valves: 3 Fork Length: 1070mm Seat Belt: Yes Attachments / Notes: Sideshift *Excludes GST

$14,900
Malaga, WA

Dealer used
11 hours ago

Kubota SVL75 track loader

  • 2426 hr

This SVL75 powerhouse track loader is in great condition has service history and many extras , Includes , New engine supplied and fitted by Kubota dealer recently Canvas seat Cover External emergency stop Battery isolator Tinted windows Fire Extinguisher Beacon Reverse beeper UHF Stereo This machine has a new engine fitted and has done only a few hundred hrs since installation and runs beautifully. Be quick to grab this one ! Price excludes GST

$68,500Negotiable
Forrestdale, WA

12 hours ago

KUBOTA KX080-3 Excavator For Sale

  • 2098 hr

Kubota KX080-3 Excavator For Sale 2021 Model 2098 hours Full Service History Mine Spec Battery isolator Starter isolator Emergency Stop Buttons x2 UHF Beacon Reflective Tape Fire Extinguisher Seat Cover Hydraulic Quick Hitch 3 Buckets Located in Forrestdale, WESTERN AUSTRALIA Will ship Nationally Price does not include GST

$69,500 Excl. Gov. Charges
Forrestdale, WA

Dealer used
18 hours ago

2020 BANDIT INTIMIDATOR 12XP COMMERCIAL WOOD CHIPPER

  • 2093 hr

11/2019 BANDIT INTIMIDATOR 12XP COMMERCIAL 12" DIESEL WOOD CHIPPER Purchased new in 2020 for $138,600 CLEARANCE PRICE NOW AT ONLY $64,950 plus gst Approxiemetly 1000 hours chipping small branches around power lines Low 2093 total engine hours Fully tested & ready to go straight back into work Manufactured in USA Clean & tidy chipper & hard to find a better unit Current Photo's of actual Chipper & of the unit you will receive BANDIT INTIMIDATOR 12XP WOOD CHIPPER is a 12” Capacity Hand-Fed Profe

$64,950
Austral, NSW

Dealer used
18 hours ago

Used Merlo 27.6 Telehandler 2018 Model with 2686hrs, Forks & Re Spray

  • 2686 hr

Used Merlo 27.6 Telehandler 2018, Low Hours with Forks - 2.7 T Lift Capacity - 6 Meter Lift Height - Air Conditioning - Safety System Digital Display - Year 2018 - Pallet Forks - Hours on the units 2686 - Full Detail & Paint Touch Up - Risk Assessment - Serviced - Detailed - 4WD - 3 Steering Modes - Flashing Light - $79,500 plus GST All units will come in great cosmetic and mechanical order

$79,500 Excl. Gov. Charges
Smeaton Grange, NSW

Dealer used
21 hours ago

Stand on Loader Ditch Witch SK650 Tracks 2011 Diesel

  • 2918 hr

Stand on Loader Ditch Witch SK650 Tracks 2011 Diesel. 2918 hours. With kubota engine on tracks. Quick release bucket.

$19,800
Malaga, WA

Dealer used
Yesterday

2008 BOBCAT S70

  • 2046 hr

2008 BOBCAT S70, with 1100mm wide bucket, manual hitch, auxiliary hydraulics, Kubota 3 cylinder D1005 diesel engine, rops open cab, battery isolator, work lights, 2046 hours, runs well. Reference Number: CBL231101 Make: BOBCAT Serial #: A3W611446 Price: $22,500 $24,750 inc GST For more information please visit our website or call Gary on .

$22,500
Welshpool, WA

Dealer used
07/05/2024

Engines

  • 3000 hr

Cat C18 Running Engines have video Computer Print outs Complete Engines located perth Area

$55,000
Perth, WA

Dealer used
07/05/2024

Excavator Kubota KX Series 1.8 Ton

  • 2700 hr

2700 hrs 2 Speed Travel Widening Tracks Good Tracks Work Lights Piped for Hammer or Auger Great little Clean up bucket Good Seat Rops Compliant Starts first go, blows no smoke not sure on the year model its not noted plus gst

$19,999
Rathmines, NSW

Dealer used
07/05/2024

Compressor Denyo 130CFM Diesel 2975 Hours

  • 2975 hr

Compressor Denyo 130CFM Diesel 2975 Hours. 2 outlets.

$8,900
Malaga, WA

Dealer used
07/05/2024

CAT 259D Skidsteer Loader

  • 2385 hr

Cat 248B Skidsteer Loader 2004 model 80hp 3.3 ton 2385 hours showing (still using machine) 1700mm wide cat genuine bucket. Bucket is straight and in very good order. Bolt on cutting edge. Tight pins and bushes throughout. Hydraulic quick coupler Air cond cab - works well No oil leaks Additional counterweight Powerful machine. Services are up to date, next due at 2500 hrs. Has high flow hydraulics but we’ve never used it. Can arrange freight Price is plus GST

$28,500
West Ballina, NSW

06/05/2024

2018 CASE CX17C. 1.7T EXCAVATOR

  • 3000 hr

CASE CX17C $18000 ONO - make an offer 2018 Model 3000 Hours 1 owner. Inspections welcome Located in Seaford VIC

$18,000
Seaford, VIC

06/05/2024

TCM 2500kg LPG forklift with 4350mm 3 stage mast & sideshift

  • 2492 hr

Unit / Fleet: R2746 Make: TCM Model: FG25T3 Serial Number: 2B504448 Engine Hours: 2492 at 21/6/23 Nominal Lift Capacity: 2500kg Fuel Type: LPG Transmission: Automatic Equipment Type: Forklift Mast Type: 3 Stage Lift Height: 4350mm Tyre Type: Solid Flashing Beacon: Yes Work Lights: Yes Hydraulic Valves: 3 Fork Length: 1070mm Seat Belt: Yes Attachments / Notes: Sideshift ex. GST

$19,900
Malaga, WA

Dealer used
06/05/2024

Forklift CAT 2.5 Tonne Diesel 2021 Container Mast

  • 2454 hr

Forklift CAT 2.5 Tonne Diesel 2021 Container Mast. Side shift and fork positioning. 2454 hours.

$19,500
Malaga, WA

Dealer used
06/05/2024

2019 / 2020 Kobelco SK17SR-5 with WARRANTY 2 AVAILABLE

$28,000
Spreyton, TAS

06/05/2024

Manitou MRT2540 Rotational Telehandler, Forks, EWP, Bucket, Winch, Jib

  • 2806 hr

Used Manitou MRT2540 Rotational Telehandler with Forks, EWP, Winch, Jib & Bucket - Manitou MRT2540 - 4Tonne Lift Capacity - 25 Meter Lift Height - 360 Degree Rotational - Hours 2806 - Year 2016 - Air Conditioning - 3 Steering Modes - 4 Wheel Steer - Front 2 Wheel Steer - Crab Steer - 4 x Stabilizer legs - Fully Serviced - Pallet Forks - Safety System - Log Book - Operators Manual - Comes with 10 Year Certification - NDT Crack and Corrosion test with certificate - Extendable Work Platform/ EWP

$260,000 Excl. Gov. Charges
Smeaton Grange, NSW

Dealer used
06/05/2024

Wanted: 2015 CAT 301.7D Mini Excavator

  • 2500 hr

My Cat excavator is no longer needed as come to the end of my NBN contract . Can sell as a combo (2006 Mitsubbishi Canter 7/800 crane tipper truck ) & custom made steel trailer with brand new axel's , wheels & tyres . Both have been regularly serviced & looked after. Very Reliable Trailer , Excavator & 300, 450, 600, 1000mm buckets & Ripper will be included in sale If add is still up it's available Both located in Tweed area

$37,000
Pacific Pines, QLD

04/05/2024

2021 Hitachi ZX360LC-5 Excavator

  • 2994 hr

2021 Hitachi ZX360LC-5b Excavator One owner 2,994hrs with full service history Sitech Trimble ready plug & play GPS wiring Tilt muddy, GP bucket & ripper attachment Immaculate condition Located Penrith NSW

$264,000
Penrith, NSW

Dealer used
04/05/2024

Bobcat Mini Loaders, Excavators, 2T Tippers

  • 3000 hr

Bobcat MT85 Mini Track Loader package. One owner, very good condition. Features include; •Kubota 3 cylinder diesel engine •904mm track width •1130mm bucket •Bigfoot Trencher •4 in 1 Bucket •Spreader Bar •PDX Drive with 200, 300, 450mm Augers •Tilting Plant Trailer •Genuine OEM undercarriage upgrade - greaseless •3000hr •Service completed •Both drive motors replaced •New pivot pins •New tilt cylinder pins & bushes •New hydrostatic belt Package weight 3000kg Machine is still in service. Will

$46,500Negotiable
Burdell, QLD

02/05/2024

Komatsu PC228UC

  • 2300 hr

Komatsu PC228UC Trimble Earthworks Tilting hitch 2300 hrs Ripper , GP & Mud bucket $300k+gst

$330,000
Mackay, QLD

02/05/2024

2018 Kobelco SK55SRX-6 MIDI Excavator. “1 Owner”MINT!👌

  • 2200 hr

2018 Kobelco SK55SRX-6 MIDI Excavator. MINT!!👌 **Only approx. 2200 hrs** ***$64500 plus GST*** This Super Clean “One Owner” excavator is in excellent condition throughout and would be one of the cleanest late model used machines on the market. The cab area shows little sign of wear and tear plus all controls work as they should including the Ice Cold A/C. The exterior is clean and has virtually no scratches or dents plus paint still has a nice shine to it. Yanmar engine and hydraulics

$64,500Negotiable
Oakdale, NSW

Dealer used
02/05/2024

excavator Yanmar VIO-35-6 3.5 ton

  • 2221 hr

made in Japan, low 2221 hrs, good rubber tracks, quick hitch, two buckets and ripper. Always serviced with original Yanmar consumables. Piped for grab or auger. Very tight boom, no leaks, no probs, no faults.. $49k. + gst . Possibly can deliver for extra $.

$48,000
Launceston, TAS

01/05/2024

EXCAVATOR TAKEUCHI TB215R

  • 2934 hr

2015 Takeuchi Tb215r mini excavator 1.5 ton retractable tracks from 1280 to 980 removable rops and canopy for limited access sites, two speed tracking, new boom pin and bushes, just had full service and fresh paint. Tracks good not that old, comes with half hitch 1m mud bucket and 450mm trenching bucket , good tidy reliable little machine, no oil leaks.ready to go straight to work. Won’t disappoint can come with trailer for extra cost

$18,900
Lochinvar, NSW

29/04/2024